Over the last years MMCX has developed as the standard connectivity solution for repeatable measurements with highest signal fidelity.
Where traditional passive probes have long ground leads meaning a high inductance causing a ground loop, the compact MMCX design overcomes these traditional obstacles. PMK’s MMCX probe series provides models with a very low capacitive loading of less than 4pF because of their direct MMCX input.
Different models are available up to >1GHz bandwidth and ±42V input voltage making the MMCX probe series the modern and ideal solution for testing, debugging, and design validation.
Individual Connectivity Accessories for the Highest Signal Fidelity
The MMCX probes series has a universal BNC output connector and is compatible with any oscilloscope with a 50Ω input impedance or 1MΩ input impedance and a 50Ω feed-through termination, allowing PMK’s MMCX Probes to be used on any oscilloscope in the lab.
The active probe models require a power supply, which is not included in the scope of delivery and has to be ordered separately.
Models & Specifications
| Order number | Article | ||||
|---|---|---|---|---|---|
| MMCX-P0725 | Passive probe with MMCX input, 700MHz, 42V peak, 25:1, 1.2m cable length, calibration certificate not included | ||||
| MMCX-P0610 | Passive probe with MMCX input, 600MHz, 42V peak, 10:1, 1.2m cable length, calibration certificate not included | ||||
| MMCX-P0610RO | Passive probe with MMCX input, 600MHz, 42V peak, 10:1, 1.2m cable length, calibration certificate not included, read-out | ||||
| MMCX-A1025 | Active probe with MMCX input, 1GHz, 42V peak, 25:1, 1.2m cable length, calibration certificate included, power supply PS2/PS3 and connection cable required and to be ordered separately | ||||
MMCX Probe Series DatasheetAccessories
| Order number | Article | ||||
|---|---|---|---|---|---|
| FF-SQ-MMCX5 | 5x MMCX Y-lead adapter, MMCX socket to 2x 0.025'' (0.635mm) socket, compatible with square pins with 0.100'' (2.54mm) space, -40°C to +125°C | ||||
| FF-HTSPAD-MMCX3 | 3x MMCX solder-in cable adapter HT, MMCX socket with 50Ω RF micro coax cable to flex solder-in pad, -40°C to +155°C (1x 0Ω, 1x 36Ω, 1x 75Ω) | ||||
| FF-2XR-MMCX | MMCX Y-Lead, MMCX socket to 2x XR Mini-Hook | ||||
| FF-UFL-MMCX2 | 2x MMCX cable adapter, MMCX socket with 50Ω RF micro coax cable to UF.L plug, -40°C to +125°C | ||||
| FF-HTS-MMCX2 | 2x MMCX solder-in cable adapter HT, MMCX socket with 50Ω RF micro coax cable and open end, -40°C to +155°C | ||||
| 972416100 | 2-pole test clip SMD, for use with FF-SQ-MMCX5 | ||||
| P25-2 | Pico Hook™, red, for use with FF-SQ-MMCX5 (included in scope of delivery) | ||||
| P25-0 | Pico Hook™, black, for use with FF-SQ-MMCX5 (included in scope of delivery) | ||||
| 890-502-130 | SMD test grabber, 1 pair, green/yellow | ||||
| D010031 | 50Ω BNC feedthrough for use with 1MΩ oscilloscope inputs, 0.5W | ||||
Power Supplies
| Order number | Article | ||||
|---|---|---|---|---|---|
| 889-24V-INT | Wall plug power supply PS-01, no remote control capabilities | ||||
| 889-09V-PS2 | PS-02 (2 channels, with USB interface for remote control) * | ||||
| 889-09V-PS2-L | PS-02-L (2 channels, with LAN and USB interface for remote control) * | ||||
| 889-09V-PS3 | PS-03 (4 channels, with USB interface for remote control) * | ||||
| 889-09V-PS3-L | PS-03-L (4 channels, with LAN and USB interface for remote control) * | ||||
| 889-09V-AP01 | AP-01 (battery pack, 1 channel, no remote control) * | ||||
| 890-520-800 | MMCX-A probe power supply cable (0.5 m) *For PS-02/PS-03/AP-01 only | ||||
| 890-520-815 | MMCX-A probe power supply cable (1.5 m) *For PS-02/PS-03/AP-01 only | ||||
product search
Since December 2018 PMK Mess- und Kommunikationstechnik GmbH is
DIN EN ISO 9001:2015 certified
Munich, Germany
03.12. – 04.12.2024
Nuremberg, Germany
11.03. – 13.03.2025
Nuremberg, Germany
06.05. -08.05.2025